Introduction
RFID cards support building access, hotel room entry, vehicle access, and many other applications. Cards may look alike, yet differences in frequency, chip, and protocol affect how each card works with a reader.
Operating frequency divides RFID cards into three common groups: low frequency (LF), high frequency (HF), and ultra high frequency (UHF). Each group has its own reading characteristics and typical uses. Knowing these differences helps narrow the options for a particular application and highlights what needs checking against an existing system.
RFID Card Types by Frequency
Operating frequency provides a starting point for comparing RFID cards. The table shows typical reading methods and example uses for LF, HF, and UHF cards.
| Type | Operating frequency | Typical reading method | Example card uses |
|---|---|---|---|
| Low frequency (LF) | 125 kHz in many card systems | Presented close to a reader | Building access, employee identification, and some hotel key cards |
| High frequency (HF) | 13.56 MHz | Presented close to a reader | Building access, hotel key cards, and transit cards |
| Ultra high frequency (UHF) | Regional frequencies generally within 860 to 960 MHz | Read from farther away with a suitable reader and antenna | Vehicle access and other longer range identification cards |
Example uses overlap because the same application may rely on different card technologies.
Low Frequency (LF) RFID Cards
LF cards remain common in traditional access and employee identification systems. Examples include cards containing EM4102 or EM4200 chips. Such cards remain in use alongside the readers and access systems designed for them.
Functions differ among LF chips. EM4102 and EM4200, for example, store identification data that readers can read but cannot rewrite. Other LF chips offer different memory and encoding options.
High Frequency (HF) RFID Cards
HF cards serve access, hotel, and transit systems. This group includes MIFARE chip families and cards based on LEGIC technology. NFC also operates at 13.56 MHz, although sharing that frequency does not make every HF card suitable for every NFC application.
Chip choice and system design shape available data and authentication functions. Two HF cards can therefore offer different capabilities despite operating at the same frequency.
Ultra High Frequency (UHF) RFID Cards
UHF cards suit systems that need to identify a card without bringing it close to a reader. Vehicle access offers one example, provided card placement, reader, antenna, and entry layout are designed and tested together.
Equipment and surroundings affect reading performance. UHF operating frequencies also vary by region, so card and reader specifications need to match the system at the place of use.
What Do Common RFID Card Names Mean?
Alongside LF, HF, and UHF, card names may describe a chip family, a communication technology, or an application:
- Proximity card: In access control purchasing, this often refers to a 125 kHz card used for door entry or employee identification. Cards containing EM series chips offer one example.
- MIFARE card: A 13.56 MHz card containing a MIFARE chip from NXP. MIFARE Classic, Ultralight, and DESFire are different chip families. Ultralight is used for limited use tickets, while DESFire appears in access control and transit systems.
- LEGIC card: A card containing a chip that supports LEGIC prime or LEGIC advant. Systems based on LEGIC technology can combine building access with applications such as employee time and attendance.
- NFC card: A card using NFC, a short range communication technology operating at 13.56 MHz. With a suitable NTAG chip, a tap can open a digital business card or loyalty page on a compatible phone.
- Hotel key card: A name based on room access rather than chip type. RFID hotel key cards may use LF or HF technology, depending on the lock system.
One card may fit several descriptions. A hotel key card, for example, may also contain a MIFARE chip.
How to Choose or Replace an RFID Card
Define the Reading Requirements
Start with the intended use and reading method. For building access, check whether users present cards close to a door reader and whether one card must also work with an attendance system. For hotel room access, identify the lock and card encoder system. For vehicle entry, establish the required reading distance and planned card position.
Data requirements also vary. A membership, event, or transit system may read a card identifier, use information stored on the card, or support an NFC interaction.
Check System Compatibility
For a new project, select the card and reading system together based on the required use. If close range contactless reading is needed, compare contactless IC card options against the reader specifications. When replacing an existing card, start with the reader or lock model and the original card specifications.
Check frequency, chip, protocol, data format, encoding requirements, and any required card size or construction. Test a sample with the actual reader and system before placing a bulk order. A reader may detect a card without completing the intended function if card data or system configuration differs from what the application requires.
Conclusion
LF and HF cards commonly serve applications where users present a card near a reader. UHF cards can support identification from farther away. These frequency groups help narrow card options for building access, hotel entry, transit, and vehicle access.
Final selection also depends on the chip, protocol, and data required by the reader and system. Those details matter when specifying cards for a new project and when replacing cards already in use.
Find the Right RFID Card for Your System
Choosing cards for a new project or replacing cards in an existing system? Share the application, reader or lock model, and any available card specifications when you contact ZFCARD to discuss suitable options.
Frequently Asked Questions
Are NFC Cards a Type of RFID Card?
Yes. NFC operates at 13.56 MHz, placing NFC cards within the HF RFID category. A card using 13.56 MHz, however, may not support a particular NFC application.
Can a Phone Identify My RFID Card Type?
A phone with NFC can detect some 13.56 MHz cards and may show limited card information. Such phones generally cannot read 125 kHz LF cards. No response from a phone does not, by itself, establish a card’s frequency or chip type.
Can I Identify an RFID Card by Its Appearance?
Appearance offers limited clues. Cards containing different chips may share the same size and printed design. A model name or technical marking can help narrow the possibilities, but visual inspection alone cannot confirm technical specifications.